Rack Case
August 15th, 2011
Comments off
how much would a 30 rack be in new jersey?
how much would a case of 30 beers in new jersey be?
Depends on the beer and where you get it.
OSP ABS Rack Case - Molded 4 Space Rack Case
|
|
2U, 19 Deep Molded Audio Rack Case $89.99 Made in the USA from recycled materials, the G-PRO-2U-19 from Gator features molded-in ergonomic side carry-handles and full sized front and rear lids that are secured with recessed steel twist latches. The 2U, 19" audio rack case is made of a virtually indestructible roto molded polyethylene.The case includes an offer for a free rear rack rail from Gator.Virtually indestructible roto molded polyethylene design19" rackable depthFull sized front and rear lidsMolded-in, ergonomic side carry handlesRecessed steel twist latchesMade in the USAMade from recycled materialsFree rear rack rail offer includedGet yours today, with the security of our 85 plus years of experience and the Sam Ash Direct 45/60day return/price protection policy. |
|
|
AudioFire12 Firewire Audio Interface $599 AudioFire12 offers the same high quality hardware and software as the new AudioFire8, but with 12 balanced analog inputs and outputs for 24 bit 192kHz recording and playback. If you already have a mixer and tons of microphone / instrument preamps, but you need to get all that audio into your computer then the AudioFire12 is just for you. The AudioFire12 has 12 balanced analog inputs and outputs (TRS), 2 FireWire ports, MIDI I/O, word clock synchronization, and 12 channels of full duplex 24 bit 192kHz recording and playback. Hardware Features FireWire (IEEE 1394a) interface with 15' cable 12 balanced " analog inputs: 113dB (A-weighted) dynamic range +4dBu / -10dBV nominal levels 12 balanced " analog outputs: 114dB (A-weighted) dynamic range +4dBu / -10dBV nominal levels MIDI I/O Sync via word clock Supports full duplex 12 channel in, 12 channel out operation at 24 bit, 192kHz sample rate Rack mountable single space breakout box Heavy-duty aluminum case 32-bit / 1.6 gigaflop DSP for digital mixing Near zero latency hardware monitoring Software Features Software console for monitoring, metering, and setting levels Low-latency drivers support all major pro audio software: Low Latency ASIO 2.0 GSIF 2.0 (Gigastudio 3 w/ low latency MIDI) CoreAudio & CoreMIDI PC System requirements: Windows XP 256 MB RAM (512 MB recommended) Mac System Requirements Mac OS X (10.3.9 or later) G4 or better processor 256 MB RAM (512 MB recommended) |
|
|
AudioFire8 Firewire Audio Interface $499 AudioFire8 offers the same high quality hardware and software found in the popular Layla3G product, but with the addition of a FireWire interface. With the AudioFire8 you can record 24 bit 96kHz audio with low latency monitoring on any Windows XP or Mac OS X computer (desktop or notebook) with a FireWire port. AudioFire8 is the perfect center for any professional studio, whether at home or on the road. It has 2 universal inputs with mic preamps, phantom power, channel inserts, and trim knobs so you can just plug in your microphone or instrument and record whenever or wherever you want. AudioFire8 also comes with 6 balanced analog inputs (TRS), 8 balanced analog outputs (TRS), a stereo headphone output, 2 FireWire ports, S/PDIF I/O, MIDI I/O, word clock synchronization, and 10 channels of full duplex 24 bit 96kHz recording and playback. Hardware Features FireWire (IEEE 1394a) interface with 15' cable 2 auto-sensing universal inputs (mic/guitar/line): Meters, trim knobs, phantom power, & channel inserts 6 balanced " analog inputs: 113dB (A-weighted) dynamic range; +4dBu / -10dBV nominal levels 8 balanced " analog outputs: 114dB (A-weighted) dynamic range; +4dBu / -10dBV nominal levels S/PDIF I/O at 24-bit/96kHz MIDI I/O Stereo headphone output with volume knob Sync via word clock or S/PDIF Supports full duplex 10 channel in, 10 channel out operation at 24 bit, 96 kHz sample rate Rack mountable single space interface box Heavy-duty aluminum case 32-bit / 1.6 gigaflop DSP for digital mixing Near zero latency hardware monitoring Software: Software console for monitoring, metering, and setting levels Low-latency drivers support all major pro audio software: Low Latency ASIO 2.0 GSIF 2.0 (Gigastudio 3 w/ low latency MIDI) CoreAudio & CoreMIDI PC System requirements: Windows XP 256 MB RAM (512 MB recommended) Mac System Requirements Mac OS X (10.3.9 or later) G4 or better processor 256 MB RAM (512 MB recommended) |
|
|
Converta Raxx 10x10 Space Combo Rack Case $249.99 A great design to maximize rack storage in a minimum of vertical space. Ideal for the DJ or musician who wants to get on and off the job in as short a time as possible. After removing the top of the rack, 10 or 12 spaces of gear can be moved to any of 8 different stops from zero to 45 degrees. Removing the front panel allows the use of 6 or 10 spaces of equipment. Remove the rear cover and there is easy access for patching and connecting cables. Rugged plywood construction, grey carpet covering, heavy-duty butterfly latches, releasable hinges and nickel-plated corners. 10 spaces over 10 spaces with casters. |
|
|
Converta Raxx 10x6 Space Combo Rack Case $279.99 A great design to maximize rack storage in a minimum of vertical space. Ideal for the DJ or musician who wants to get in and out in as short a time as possible. After removing the top of the rack, 10 spaces of gear can be moved to any of 8 different stops from zero to forty-five degrees. Removing the front panel allows the use of 6 or more spaces of equipment. Remove the rear corner and there is easy access for patching and connecting. Rugged plywood construction, carpet covering, nickle-plated latches and corners. |
|
|
FRP16W ATA 16 Space Rack Case (with Wheels) $389.99 This FRP amp rack features an 18 inch rackable body depth to accommodate most amplifiers and larger equipment. Standard rear rack rail, 4" caster kit, 16 spaces. |
|
|
G-PRO Molded Rack Case (Assorted Sizes) $114.99 Rotationally modeld rack case; 19.25" deep. Virtually indestructible roto molded polyethylene design. 19" rackable depth. Full sized front and rear lids. Molded-in, ergonomic side carry handles. Recessed steel twist latches. Includes 10-32 mounting screws with protective washers. Stackable design. Available in 8U; 6U & 4U space. Made in the USA. Made from recycled materials. |
|
|
HR2 Headphone Amplifier $104.95 Furman HR-2 Headphone Remote Stations (sometimes called satellites) are passive devices intended for use with the Furman HA-6A Headphone/Monitor Amplifier, to increase the number of headphone stations beyond the six provided, and/or to locate them more conveniently. With the use of a simple adaptor, HR-2's may also be used successfully with any stereo power amplifier of 50 watts per channel or less to convert them to use as headphone distribution amplifiers. (The Furman SP-20A Half Rack 20 Watt/channel Power Amplifier has the required adaptor built in.) Each HR-2 box can accommodate two sets of headphones, each with its own volume control. USING THE HR-2In rehearsals, headphones are often used to keep sound levels down to avoid disturbing neaighbors. In the recording studio, headphones are most often used in the overdubbing process, where new musical tracks are recorded in synchronization with previously recorded tracks. The musicians doing the overdub hear the already recorded tracks in their headphones, and play along with them. Because of the presence of open microphones, headphones are much preferred to speakers for cueing overdubs. In many situations, it may be sufficient to plug all headphones directly into an HA-6A or other headphone amp. However, in a larger studio, or when each musician must have easy access to his or her headphone volume control, it is more practical to use several HR-2 Remote Stations at strategic locations around the room. In this case, the HA-6A (or the stereo power amplifier substituting for it) would most likely be installed in the control room. The HR-2 Remote Stations connect in "daisy chain" fashion to the SPEAKER B-SATELLITE/REMOTE output on the rear panel of the HA-6A. This output is a male 3-pin XLR connector, so that ordinary microphone cables can be used. The HA-6A connects to the first HR-2 box; another mic cable connects the first HR-2 to the second HR-2; a third mic cable connects the second HR-2 to the third HR-2; and s |
|
|
LPT6000 Multi-Purpose Laptop Stand with Shelf $39.99 The LPT6000 Multi-Purpose Laptop Stand is versatile and can stand alone on any flat surface for quick and easy set-up or clamp to virtually any table, rack case or other DJ equipment with 2 included mounting brackets. The LPT6000 features independent height and width adjustments, and an included center rod extension, which accommodates larger laptops/equipment. All contact surfaces are covered with EVA rubber to prevent damage or scratching to mounting surface and equipment. The LPT6000 also includes a FREE shelf for additional laptop equipment and/or accessories.Get yours today, with the security of our 85 plus years of experience and the Sam Ash Direct efficient order processing, your satisfaction is guaranteed Weight Capacity: 10 lbs. Height Adjustment: 9.25-14.25 Width Adj: 9.5-11 Depth Adj: 10.25 Color: Black Powder Coat Finish Gross Weight: 6.60 lbs |
|
|
Layla3G PCI Audio Interface $499 Layla3G is the third generation of Echo's flagship PCI based multitrack digital recorder. The original Layla premiered seven years ago to critical acclaim, including a TEC award nomination. Since then Echo has been perfecting the art of making high quality recording products at affordable prices. Now you can get all of the features of the Layla24 for a new low price, but with better converters and dual mic preamps!! Layla3G is the perfect center for any professional studio. It has 2 universal inputs with mic preamps, 6 balanced analog inputs, 8 balanced analog outputs, and a stereo headphone output. ADAT lightpipe, optical and coaxial S/PDIF, and MIDI are included as well. Layla3G comes with a 15' cable and PCI card that connects to the audio interface. Layla3G is compatible with PCI-X (3.3 or 5 volt) motherboards and Power Mac G5 computers, as well as older systems. Hardware Features 2 auto-sensing universal inputs (mic/guitar/line): Meters, trim knobs, phantom power, & channel inserts 6 balanced 1/4" analog inputs: 113dB (A-weighted) dynamic range; +4dBu / -10dBV nominal levels 8 balanced ?" analog outputs: 114dB (A-weighted) dynamic range; +4dBu / -10dBV nominal levels S/PDIF I/O (coax & optical) at 24-bit/96kHz ADAT optical digital I/O MIDI I/O Stereo headphone output with volume knob Sync via word, S/PDIF, ADAT, or MTC Supports full duplex 16 channel in, 16 channel out operation Rack mountable single space breakout box Heavy-duty aluminum case 15' cable to connect to PC PCI bus mastering interface: Bus powered; Works with PCI-X (3.3/5 volt) & Power Mac G5 A/D & D/A converters in external breakout box 56-bit / 100mHz DSP for digital mixing: Near zero latency hardware monitoring Software Features Software console for monitoring, metering, and setting levels Low-latency drivers support all major pro audio software: Low Latency ASIO 2.0; GSIF 2.0 (Gigastudio 3 w/ low latency MIDI); WDM kernel streaming mode; CoreAudio & Core |
|
|
MG166C 16 Channel Rack Mount Mixer $379.99 Unmatched Quality and PerformanceWhether you have a mixing applications that involves only a few channels, or up to 32 inputs with substantial signal routing versatility, Yamaha's MG-series offers a console that will give you the capacity, control, and performance you deserve. All models are remarkably compact and lightweight for superior handling and portability, but absolutely no compromises have been made in terms of features, performance, or durability. The MG mixers offer an extraordinary blend of technology: some inherited from professional Yamaha mixing consoles you're likely to see in distinguished halls throughout the world, and some developed specifically to deliver optimum performance in the MG-console format. In either case these performance-packed mixers are founded on a world-spanning network of human and technological resources that crystallize to deliver features that really matter, and sound that is undeniably superior. Lightweight, Portable Designs Designing a lightweight mixer is not too difficult, but designing a lightweight, compact mixer that delivers serious performance is another matter. The Yamaha design team went to extraordinary lengths in the MG series, including in-depth material and structural analysis, to bring you maximum manageability and maximum performance in the same packages. The result is that you can easily pop the smallest models into your briefcase or shoulder bag and take with you anywhere. Even the larger models can be tucked under an arm and carried around quite easily. But the performance you'll get at the studio, club, hall, or anywhere you choose to use these fine mixers is far from lightweight. Every one of the MGseries mixers provides significant space savings along with huge performance benefits. Versatile Connectivity and Pro-class Connectors Top-mounted input and output connectors make setting up and re-patching your system quick and easy. All models feature high-quality Neutrik balanced XLR connecto |
|
|
RTAM Sonic Analysis Microphone for Drive Rack Series $99.95 The RTA-M by dbx is an omni-directional, flat frequency measurement microphone specially designed for the Driverack series to pick up all frequencies from 20 Hz to 20 kHz , ensuring accurate "pinking"/real-time analysis of your audio. It runs on phantom power (supplied by the Driverack units) and comes with a clip and case. Features: Polar Pattern : omni-directional Element : back electret-Condenser Frequency : 20 Hz - 20 kHz Impedance : 250 30% (at 1,000Hz) Sensitivity : -63 dB 3 dB ( 0 dB=1V/ microbar 1,000 Hz indicated by open circuit ) Operating Voltage : phantom power 15V D.C. |
|
|
RollX Pull Handle Rack Case with Wheels (Assorted Sizes) $194.99 Roll-X cases have a depth of 17" and will accommodate 19" rack mount equipment with 3, 4, 5 and 6 rack space models. Made of polyethylene rotationally molded plastic with 2.5" wheels and industrial pull handle, the Roll-X racks interlock and stack with each other. |
|
|
SKB191010V Gig Rig 10 Space Rack Case (with Wheels and Velcro Top) $589.99 Ergonomic design with a completely adjustable pop-up Velcro board on top to accommodate a wide variety of mixers and accessories. 10 space rackmount below. Rock solid construction with heavy-duty locking systems. Lids, front panel and large rear access panel lift apart and re-assemble securely. |
|
|
SKB1916U20 16 Space Roto Shockmount Rack Case $729.99 An internal frame mounted on adjustable elastomer shock absorbers on all eight corners. These revolutionary shocks are designed to control the effects of shock and vibration on three axes. The "sway" space around the internal frame provides natural air conditioning -- very important for delicate audio equipment. They are half the weight of the old wooden cases. SPECIFICATIONS: Rackable Mount Depth: 23" Front Rail to Rear Rail: 20" Lid Depth: 3 1/4" Exterior Dimensions: 27 1/2" W 27 3/4" D 39 1/2" H Weight: 105.0 lbs. |
|
|
SKB19RSF2U Studio Flyer Portable Studio Rack Case $209.99 The SKB Studio Flyer is a standard 2U rack mount for recording devices (or a rackmount disk drive) and an adjustable laptop compartment are the perfect solution for transporting and protecting portable studio equipment. The Studio Flyer case is roto-molded with in-line wheels, a two stage injection molded pull-out handle for easy transport, patented, glass fiber reinforced nyloy, trigger release latching system with a TSA recognized and accepted locking latch and a cushion grip rubber over-molded handle for carrying comfort. Think you can fit your entire laptop recording studio into an overhead bin? Now you can! 2U rack and Laptop combo case Nylon reinforced fiberglass trigger release latches Recognized and accepted TSA lock Two stage retractable handle and easy glide wheels Cable pass through from laptop to rack Built-in mouse pad surface Removeable cover Dimensions: Interior Length 19.7500 in 50.1650 cm Interior Width 14.0000 in 35.5600 cm Exterior Depth 22.0000 in 55.8800 cm Exterior Width 14.0000 in 35.5600 cm Exterior Height 9.2500 in 23.4950 cm Rack Space Units Total: 2 Rack Space Units Bottom: 2 Rack Depth Front Rail to Back Lid 11.5000 in 29.2100 cm Lid Depth 2.0000 in 5.0800 cm Product Weight 15.5000 lb 7.0307 kg |
|
|
SKBR4 Space Roto Rack Case $114.99 The US Series is the ultimate in American technology with its roto molded tuff shell, front and rear lids, recessed heavy-duty twist latches, molded in handles, shock absorbing rubber feet and the recognizable patented deep Roto-X pattern for solid stackability. The unique molded-in unbendable valance and steel threaded rails with self tapping screws make the US Series racks convenient to use and the most durable. |
|
|
SKBR8 8 Space Roto Rack Case $194.99 The US Series is the ultimate in American technology with its roto molded tuff shell, front and rear lids, recessed heavy-duty twist latches, molded in handles, shock absorbing rubber feet and the recognizable patented deep Roto-X pattern for solid stackability. The unique molded-in unbendable valance and steel threaded rails with self tapping screws make the US Series racks convenient to use and the most durable. |
|
|
ULXD14/150 Lavalier Wireless System $1517 The Shure ULXD4 is a half-rack, networkable wireless receiver for use with ULX-D Digital Wireless Systems. With an expansive set of professional features, including 24-bit / 48 kHz digital audio quality, efficient and intelligent RF performance, and AES 256-bit encryption, ULX Digital offers uncompromising wireless tailored for professional sound reinforcement.With a rugged yet lightweight aluminum case, the ULXD1 delivers uncompromising audio quality and RF performance, AES 256-bit encryption for secure transmission, and advanced rechargeability options for professional sound reinforcement applications. The Shure Microflex MX150 is a professional electret condenser microphone ideal for applications requiring low-profile placement. |
|
|
XRack Shallow Effects Rack Case (2 Space) $94.99 The XRACKS are the new generation of shallow rack cases available from SKB. The cases have a 10 1/2 inch rack mount depth. Constructed of rotationally molded polyethylene with a convenient molded-in top handle, this durable, portable case is the perfect solution for transporting shallow effects units and wireless microphone systems. Protection is complete with SKBs Limited Lifetime Warranty. |
|
|
iCDMIX2 Dual CD Mixer w/iPod Dock $299.95 Considered an industry standard for more than 10 years, Numark CDMIX systems consist of a dual CD player and mixer together in one easy-to-carry unit for mobile DJs working events, clubs that need to be able to pack away their system quickly and any other DJ on the move. Setup and teardown are fast and easy with CDMIX systems, because you don't spend as much time running cables and testing levels as with traditional component setups. iCDMIX 2 is the first CDMIX to feature an integrated Universal Dock for iPod, enabling you to play music from virtually any docking iPod. iCDMIX 2 is designed for professional use, housed in an all-metal chassis for years of rugged, reliable performance. The housing also has rack ears so you can mount it in a rack or CDMIX CASE 3 for secure transport or fixed installations. iCDMIX 2 contains a dual-deck CD player with all of the functionality and capabilities professional DJs expect in standalone units. iCDMIX 2 plays CD and CD-R discs. For performance reliability in unpredictable environments iCDMIX 2 features Numarks electronically buffered Anti-Shock skip protection.You can rapidly access points within a track using the multifunction jog/shuttle wheels. The wheels are also helpful for controlling pitch bend. You can pitch tracks up and down for easy beat matching. To help with beat matching, iCDMIX 2 automatically detects BPM and also enables you to manually tap in tempo. In addition to standard single-track and continuous playback, iCDMIX 2 offers programmable playback so you can set up a sequence of tracks for convenient playback. You can also set cue points in real time for creative performance. iCDMIX 2 has Fader Start, which can automatically start cued-up playback when you move the crossfader.iCDMIX 2 has a three-channel mixer section that is complete and on par with standalone mixers. It has a mic channel and a dedicated channel for the iPod, as well as replaceable crossfader and pre-fader cueing controls. For the main ch |
Categories: Sound Equipment case, cases, hardware, rack, rack case, rack case accessories, rack case hardware, rack case parts, rack cases music, rackmount
